導電矽膠

GSS 導電條

介紹

GSS-TYPE為GSI2二側絕緣白色油膜改製成一般矽橡膠絕緣,產品二側絕緣橡膠較導電部份為軟,以利壓縮,二側絕緣橡膠為透明,一般設計需要降低導電條硬度,減少導電層(CW)厚度,降低成本,相對壓縮率須加大。

尺寸與公差

Item Pitch/P Length/L Height/H Width (standard)/W Width of conductive layer/CW
0.05type 0.05±0.03
  • 2.0-20±0.15
  • 20.1-90±0.3
  • 90.1±150±0
  • 150.1-200±0.8
  • 200.1-270±0.1
  • 270.1-200±1.5
  • 1.0-5.0±0.1
  • 5.1-20±0.15/-0.1
  • 1.0-2.3±0.1
  • 2.4~8.0±0.15
  • 0.4±0.05 (standard)
  • 0.6±0.05(secondary standard)
0.10type 0. 1±0.03
0.18type 0.18±0.04
0.25type 0.25±0.05
 

產品物性

Item component unit GSS TYPE
Specific gravity(比重) Insulator   1.15
Conductor 1.25
Edge insulation part 1.1
Shore A(hardness)硬度 Insulator ISO7619 (TYPE A) 65~73
Conductor 63~67
Edge insulation part 20~30
Compression set(壓縮比) * % 12~18
Volume resistivity(阻抗值) Insulator Ω.cm 1x10
Conductor 3~6
Edge insulation part 8x10
Dielectric breakdown voltage(耐電壓值) Insulator kv/mm 23~27
Edge insulation part 23~27
Insulation resistance (500V DC)絕緣阻抗 * M.Ω 1x10≦
Operating temperature range(操作溫度範圍)   -25~85
 
TOP